Home » Solutions » Refrigeration Pipework Line

Refrigeration Pipework Line

Refrigeration pipework is bent tube with carefully prepared joints: tube cut to length, bent to the layout, and its ends expanded, reduced or flared so one pipe slips into the next and the joint seals. We put that work together as one line, from machines on this site, selected from a vetted partner factory and quoted against your tube sizes and drawings.

The machines in the line

  • Bend to the layout — the DW-CNC series covers 13 sizes, from Φ18 × 1.2 mm to Φ325 × 30 mm, every model bending to a maximum angle of 190°, with servo control on 5–13 axes. The DW-NC series offers 11 hydraulic sizes from Φ38 × 2 mm to Φ325 × 30 mm, also to 190°, with a minimum bending radius of 1.5 times the tube diameter. Air conditioning and refrigeration pipework is listed among the applications of both series.
  • Cut to length — the MC series semi-automatic circular saws cut round, square and rectangular tube to length at 90° or 45°, and the 3D laser pipe cutting machine cuts round, square and elliptical tube from 10 to 80 mm with no deformation and no burrs at the cut — pieces go straight to bending, welding or assembly without a deburring step.
  • Prepare the joints — the TM series tube end forming machines (TM-40 to TM-120, for tube Φ40–120 mm) shape the end of a tube instead of cutting it: expanding it to slip over another tube, reducing it to fit inside one, or flaring it for a joint. End preparation of this kind is what air conditioning and refrigeration pipework needs, and the forming head runs on linear guide rails, so the formed end repeats accurately from piece to piece.
  • Finish the ends — the pipe chamfering machines remove the sharp edge and burrs left after cutting and cut a clean, even chamfer, so the tube is safe to handle and ready to weld or assemble.

How we work with you

Zibo Vista Trading Co., Ltd. is a trading company, not a factory, and we say so openly. We select suitable models from vetted factories, compare quotations, confirm every specification in writing, inspect the goods before shipment, and consolidate everything into one export shipment. You deal with one contact person from first inquiry to delivery.

Send us your tube diameters, wall thicknesses and materials, the smallest bend radius and a drawing or photo of the formed end you need — the shape of the end decides the tooling. We confirm the model and tooling with the factory in writing before quoting.


    Scroll to Top