Home » Solutions » Automotive Exhaust Pipe Line

Automotive Exhaust Pipe Line

An exhaust pipe is a bent tube with prepared ends: cut to length, bent to shape, its ends expanded, reduced, flared or beaded so the joints fit, and chamfered so it is safe to handle and ready to weld. We put that work together as one line, from machines on this site, selected from a vetted partner factory and quoted against your tube sizes and drawings.

The machines in the line

  • Cut to length — the MC series semi-automatic circular sawing machines (MC-275B to MC-425Y) cut round, square and rectangular tube to length, straight at 90° or mitred at 45°. Five models cover round tube up to Φ90 mm at 90°. For higher volumes, the intelligent pipe cutting production line loads, cuts and deburrs steel tube in one flow: servo feeding up to 1500 mm per feed, tube from Φ25 mm to Φ125 mm by changing the clamping jaws, several tubes cut in a single pass, and the tail piece kept within 50 mm.
  • Bend to shape — the DW-CNC series covers 13 sizes, from Φ18 × 1.2 mm to Φ325 × 30 mm, every model bending to a maximum angle of 190°, with servo control on 5–13 axes and 1 to 4 layers of bending dies. For shops that bend the same parts day after day, the DW-NC series offers 11 hydraulic sizes from Φ38 × 2 mm to Φ325 × 30 mm, also to 190°, with a minimum bending radius of 1.5 times the tube diameter. For shaped cuts, holes and joints that a saw cannot make, the 3D laser pipe cutting machine cuts round, square and elliptical tube from 10 to 80 mm with no deformation and no burrs at the cut.
  • Prepare the ends — the TM series tube end forming machines (TM-40 to TM-120, for tube Φ40–120 mm) shape the end of a tube instead of cutting it: expanding it to slip over another tube, reducing it to fit inside one, flaring it for a joint, or beading it so a hose stays on. The forming head runs on linear guide rails, so the formed end repeats accurately from piece to piece.
  • Finish for welding — the pipe chamfering machines remove the sharp edge and burrs left after cutting and cut a clean, even chamfer, so the tube is safe to handle and ready to weld or assemble. A double-head machine chamfers both ends of a tube in one cycle.

How we work with you

Zibo Vista Trading Co., Ltd. is a trading company, not a factory, and we say so openly. We select suitable models from vetted factories, compare quotations, confirm every specification in writing, inspect the goods before shipment, and consolidate everything into one export shipment. You deal with one contact person from first inquiry to delivery.

Send us your tube diameters, wall thicknesses and materials, the cut lengths you run, the smallest bend radius and a drawing or photo of the finished part — especially the end shapes your joints need. We confirm the model, tooling and price with the factory in writing before quoting.


    Scroll to Top