Home » Pipe Cutting Machines » Intelligent Pipe Cutting Production Line

Intelligent Pipe Cutting Production Line

An automatic cutting line that loads, cuts and deburrs steel tube in one flow: servo feeding up to 1500 mm per feed, Φ25–125 mm tube by changing the clamping jaws, and a tail piece within 50 mm.

The intelligent pipe cutting production line turns steel tubes into cut, deburred pieces without an operator handling each tube: tubes are loaded automatically, fed by a servo to the set length, cut, and deburred in one continuous flow.

One feed moves up to 1500 mm, and the servo feeding length can be customised. Several tubes are cut in a single pass — at least four tubes at Φ25 mm — and changing the clamping jaws switches the line between steel tube sizes from Φ25 mm to Φ125 mm. The last piece of each tube, the tail, is kept within 50 mm, so very little material is wasted.

Send us your tube diameters, wall thicknesses, the cut lengths you run and roughly how many pieces you need per day, and we will confirm the line configuration and output with the factory before quoting.

Specifications

SpecificationDetails
FunctionsAutomatic loading, cutting and deburring in one line
FeedingServo feeding, up to 1500 mm per feed (customisable)
Tube rangeSteel tube Φ25–125 mm by changing the clamping jaws
Multi-tube cuttingSeveral tubes per cut — at least 4 tubes at Φ25 mm
Tail pieceWithin 50 mm, so less material is wasted at the end of each tube
PriceOn request — depends on your tube range and output target

Models

ItemKey figures
Automatic loadingTubes are fed from the loading rack without handling each tube
Servo feedingUp to 1500 mm per feed, customisable
Cutting rangeSteel tube Φ25–125 mm, by changing the clamping jaws
Multi-tube cuttingSeveral tubes per cut — at least 4 tubes at Φ25 mm
DeburringCut pieces are deburred in the same flow
Tail pieceWithin 50 mm per tube

Frequently asked questions

What tube sizes can the line handle?

Steel tube from Φ25 mm to Φ125 mm, by changing the clamping jaws. Send us your sizes and wall thicknesses and we confirm the configuration with the factory.

The tail piece is kept within 50 mm per tube. Feeding is by servo, up to 1500 mm per feed, and the feeding length can be customised.

Yes. The line cuts several tubes in one pass — at least four tubes at Φ25 mm — which is where most of its output advantage over a single saw comes from.

Applications

Higher-volume cut-to-length production for furniture, fitness equipment, automotive and general steel tube fabrication, where pieces must arrive cut and deburred ready for the next process.

Send an inquiry

Send us your tube diameters, wall thicknesses, the cut lengths you run and roughly how many pieces you need per day, and we will confirm the line configuration and output with the factory before quoting.

    Scroll to Top