Home » Pipe Bending Machines » NC Pipe Bending Machine

NC Pipe Bending Machine

Single-head hydraulic tube benders in 11 sizes, DW-38NC to DW-325NC, with microcomputer control, a minimum bend radius of 1.5× tube diameter and a maximum bending angle of 190°.

NC pipe bending machines are the hydraulic workhorse of the tube workshop: one bending head, straightforward controls and a lower price than a full CNC machine, for shops that bend the same parts day after day. The DW-NC series from our Zhangjiagang partner factory covers 11 sizes, from the DW-38NC for Φ38 × 2 mm tube up to the DW-325NC for Φ325 × 30 mm, all with a maximum bending angle of 190° and a minimum bending radius of 1.5 times the tube diameter.

A microcomputer with a touch panel runs the machine, and an encoder tracks the bending angle as it works. Programs for several angles can be stored, the machine counts finished pieces automatically, and settings stay in memory when the power goes off, so a job can continue where it stopped. A hydraulic oil cooling system keeps the machine stable over long runs.

How to choose: the model number is the largest tube diameter the machine bends. Send us your tube diameter, wall thickness, material and the smallest bend radius you need, and we confirm the model and tooling with the factory before quoting. If your parts need several different bends with tight repeatability across long runs, also look at the CNC series on this site.

Specifications

SpecificationDetails
SeriesDW-NC · 13 models
ModelsDW-38NC · DW-50NC · DW-63NC · DW-76NC · DW-89NC · DW-114NC · DW-127NC · DW-140NC · DW-168NC · DW-219NC · DW-325NC
Max. tube diameterΦ38 × 2 mm to Φ325 × 30 mm depending on model
Max. bending angle190°
ControlNC, hydraulic control with a digital display
Tooling1–2 die layers; left-hand and right-hand bending
Feed length1800–5000 mm depending on model
Weight & dimensionsConfirmed per model with your quotation
VoltageConfirmed for your country before ordering
PriceOn request — depends on model and tooling

Models

ModelMax. tube Ø × wall thicknessMax. bending radiusMax. bending angle
DW-38NCΦ38 × 2 mmR180190°
DW-50NCΦ50 × 3 mmR250190°
DW-63NCΦ63 × 4 mmR250190°
DW-76NCΦ76 × 4 mmR300190°
DW-89NCΦ89 × 6 mmR300190°
DW-114NCΦ114 × 8 mmR450190°
DW-127NCΦ127 × 8 mmR450190°
DW-140NCΦ140 × 8 mmR500190°
DW-168NCΦ168 × 14 mmR600190°
DW-219NCΦ219 × 16 mmR800190°
DW-325NCΦ325 × 30 mmR1200190°

Frequently asked questions

What is the difference between the NC and CNC series?

NC machines are hydraulic and are set up through a microcomputer and touch panel — simpler and lower cost. CNC machines drive 5 to 13 axes with servo motors, check parts in 3D and suit complex parts and long repeat runs. Tell us about your part and we will say honestly which one fits.

The minimum bending radius across the series is 1.5 times the tube diameter (R ≥ 1.5D). The exact result depends on tube material and wall thickness, which we confirm with the factory for your tube before quoting.

Tube outside diameter, wall thickness, material, the smallest bend radius and, if you have one, a drawing or photo of the finished part.

Applications

Automotive and motorcycle frames, steel tube furniture, fitness equipment, air conditioning and refrigeration, plumbing and sanitary ware, leisure goods and general tube fabrication.

Send an inquiry

Send us your tube diameter, wall thickness, material and the smallest bend radius you need, and we confirm the model and tooling with the factory before quoting.

    Scroll to Top