Home » Pipe Bending Machines » Double-Head Pipe Bending Machine & Automation Bending Line

Double-Head Pipe Bending Machine & Automation Bending Line

Double-head benders that bend both tube ends in one cycle — standard type 0–90°, rotary-head type 0–185° — plus the SW-38 / SW-50 automation bending lines with automatic loading and robot unloading.

A double-head pipe bending machine bends both ends of a tube at the same time, which is exactly what U-shaped and symmetrical parts need: chair and furniture frames, handles, towel rails and similar parts come off the machine finished in one cycle instead of two set-ups. The standard type has fixed heads and adjusts anywhere between 0° and 90°; the rotary-head type turns its heads and bends anywhere between 0° and 185°. Both run under PLC control with full-cycle or semi-cycle operation, work on one tube or several tubes together depending on the tube diameter, and come with one set of dies and one set of stops as standard.

For higher volumes, the automation bending line pairs a double-bend machine with automatic loading and unloading: a rack feeds tubes in automatically, a three-dimensional CNC servo bender forms the part, and a robot arm picks the finished piece and places it into a collection frame. The SW-38 line handles carbon steel tube up to Φ38 × 1.8 mm and the SW-50 up to Φ50 × 2 mm, both to a maximum bending angle of 185°.

Send us a drawing or photo of your part — especially the distance between the two bends — and we will confirm which type fits and quote it with the tooling.

Specifications

SpecificationDetails
TypesDouble-head standard type, double-head rotary-head type, automation bending lines SW-38 and SW-50
Bending angleStandard type 0–90°; rotary-head type 0–185°; automation lines up to 185°
ControlPLC control; full-cycle or semi-cycle operation
OperationSingle-tube or multi-tube operation, selected by tube outside diameter
Standard accessoriesOne set of dies and one set of stops included
Automation lineAutomatic rack feeding, 3D CNC servo bending, robot arm unloads finished parts into a collection frame
Double-bend centre distanceSW-38: 170–1450 mm; SW-50: 190–1650 mm
Double-head capacitiesConfirmed per inquiry — the factory publishes no standard capacity table for the double-head machine
PriceOn request — depends on type and tooling

Models

Model / typeMax. tube (carbon steel)Bending radiusMax. bending angle
Double-Head — Standard TypeConfirmed per inquiryConfirmed per inquiry0–90°
Double-Head — Rotary-Head TypeConfirmed per inquiryConfirmed per inquiry0–185°
SW-38 Automation LineΦ38 × 1.8 mmR38–200 mm185°
SW-50 Automation LineΦ50 × 2 mmR45–300 mm185°

FAQ

When does a double-head machine make more sense than a single-head bender?

When the part is bent at both ends, typically U-shaped or symmetrical parts such as furniture frames and handles. Bending both ends in one cycle is faster and keeps the two ends consistent. For one-ended or varied parts, a single-head CNC or NC machine is usually the better choice.

On the standard type the heads do not rotate and the bending angle adjusts between 0° and 90°. On the rotary-head type the heads rotate, so the angle adjusts between 0° and 185°; the part also has to be removable after bending, which we check against your drawing.

A drawing or photo of the finished part, the tube diameter and wall thickness, the material, and the centre distance between the two bends.

Applications

Steel tube furniture and chair frames, handles and rails, fitness equipment, leisure goods and other symmetrical or U-shaped tube parts; automation lines for repeated parts in higher volumes.

Send an inquiry

Send us a drawing or photo of your part — especially the distance between the two bends — and we will confirm which type fits and quote it with the tooling.

    Scroll to Top